Insignia NS-HTVMF0C User Manual - Page 7

STEP 3, You'll need, Option 1: Attaching the mounting hardware to TVs, with a flat back

Get Insignia NS-HTVMF0C PDF manuals and user guides View all Insignia NS-HTVMF0C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the left and right TV brackets (1) with the upper screw holes on the back of the TV. Make sure that the brackets are level. 2 Install washers (8) and screws (3, 4, or 5) into the holes in the back of the TV. 3 Install TV standoffs (2) in the lower screw holes on the back of the TV using washers (8) and screws (3, 4, or 5). 4 Tighten the screws until they are snug against the TV brackets. Do not over tighten. Important: After attaching the TV brackets, adjust the straps (by sliding the buckle up or down) so they are level with the bottom of the TV. You'll need or or 3 (4) 4 (4) 5 (4) 2 (2) 8 (4) Level Phillips screwdriver www.insigniaproducts.com 1 TV brackets (2) 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
FIXED-POSITION WALL MOUNT FOR TVs 40-70 in.
7
www.insigniaproducts.com
STEP 3 -
Option 1: Attaching the mounting hardware to TVs
with a flat back
1
Align the left and right TV brackets (
1
) with the upper screw holes on the back of the TV. Make sure that
the brackets are level.
2
Install washers (
8
) and screws (
3
,
4
, or
5
) into the holes in the back of the TV.
3
Install TV standoffs (
2
) in the lower screw holes on the back of the TV using washers (
8
) and screws (
3
,
4
,
or
5
).
4
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
Important:
After attaching
the TV brackets, adjust the
straps (by sliding the buckle
up or down) so they are level
with the bottom of the TV.
2
(2)
3
(4)
Phillips screwdriver
1
TV
brackets (2)
or
4
(4)
8
(4)
5
(4)
Level
or