Insignia NS-HTVMF0C User Manual - Page 8
Option 2: Attaching the mounting hardware to TVs, with irregular or obstructed backs
View all Insignia NS-HTVMF0C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NS-HTVMF0C STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Place spacers (9) over the screw holes on the back of the TV. 2 Align the left and right TV brackets (1) with the upper screw holes on the back of the TV. Make sure that the brackets are level. 3 Place washers (8) over the holes in the TV brackets. Insert screws (6 or 7) through the washers, TV brackets, and spacers. 4 Install TV standoffs (2) in the lower screw holes on the back of the TV using washers (8), screws (6 or 7), and spacers (9). 5 Tighten the screws until they are snug against the TV brackets. Do not over tighten. Important: After attaching the TV brackets, adjust the straps (by sliding the buckle up or down) so they are level with the bottom of the TV. You'll need or 6 (4) 7 (4) Level 8 (4) 8 Phillips screwdriver 2 (2) 9 (4) www.insigniaproducts.com 1 TV brackets (2)