Insignia NS-HTVMM1703-C User Guide - Page 5
Installation instructions
View all Insignia NS-HTVMM1703-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Full Motion Mount for TVs 47" - 80" Installation instructions STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Lay the TV brackets, oriented vertically, on the back of your TV. 4 Align the screw holes in the TV brackets with the mounting screw holes on your TV. 5 Identify which type of back your TV has: • Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when assembling the wall mount. • Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need spacers when assembling the wall mount. • Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You will need spacers when assembling the wall mount. 6 Remove the TV brackets. www.insigniaproducts.com 5