Insignia NS-HTVMM1703-C User Guide - Page 6
STEP 2 - Select screws, washers, and spacers, For a TV with a flat back
View all Insignia NS-HTVMM1703-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
NS-HTVMM1703-C STEP 2 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV requires, test various sizes by hand-threading the screws. Select one of the following types of screws: For a TV with a flat back: M4 X 12 mm screws (A1) M5 X 12 mm screws (A3) M6 X 12 mm screws (A5) M8 X 16 mm screws (A7) For a TV with an irregular/obstructed back: M4 X 25 mm screws (A2) M5 X 25 mm screws (A4) M6 X 25 mm screws (A6) M8 X 25 mm screws (A8) M8 X 50 mm screws (A9) Select either an M4/M5 washer (A11) or an M6/M8 washer (A12) for the corresponding types of screws. For an irregular or obstructed TV back, also use the spacers (A10) Screw fits correctly CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount. Screw is too Screw is too long short 2 Remove the screws from the holes in the back of your TV. 3 For a flat back TV, go to "STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back" on page 7. -OR- For an irregular or obstructed back, go to "STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs" on page 8. 6 www.insigniaproducts.com