Insignia NS-L26Q-10A FAQs (English) - Page 10

power level of a given station. Contact your cable or satellite provider. o If you are using cable connected directly to the TV:  Try scanning for channels: 1. Press MENU. The on-screen menu opens with the Picture menu displayed. 2. Press ◄ or ► to highlight the CHANNELS. The Channels menu opens. 3. Press ▼ to highlight Auto Channel Search, then press OK/ENTER or ► to open the Auto Channel Search screen. 4. Press ▼ to highlight Cable, then press OK/ENTER to start the scan. You can see the search progress and how many channels are found in the on-screen menu. After the scan is complete, the menu closes and your TV tunes to the first channel in the channel list.  Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable provider. o If you are using an antenna:  Try scanning for channels: 1. Press MENU. The on-screen menu opens with the Picture menu displayed. 2. Press ◄ or ► to highlight the CHANNELS. The Channels menu opens. 3. Press ▼ to highlight Auto Channel Search, then press OK/ENTER or ► to open the Auto Channel Search screen. 4. Press ▼ to highlight Antenna, then press OK/ENTER to start the scan. You can see the search progress and how many channels are found in the on-screen menu. After the scan is complete, the menu closes and your TV tunes to the first channel in the channel list.  The signal strength of the channel may be low. - Check the signal strength of the digital channels: 1. Press CH ▲ or CH ▼ to select the channel you want and to view the selected channel strength. 2. Press MENU. The on-screen menu opens with the Picture menu displayed. 3. Press ◄ or ► to highlight CHANNELS. The Channels menu opens. 4. Press ▼ to highlight Channel Strength, then press OK/ENTER or ► to open the DTV signal meter. 5. Move the antenna around the room or close to a window. Check the signal strength of the digital channels again. The optimal location may vary by channel. 6. Press EXIT to close the menu.  The UHF band (channels 14 and higher) is more directional than VHF (channels 2-13) and more sensitive to obstacles (such as trees, tall buildings, and mountains) that lie between your antenna and the broadcast tower. Getting good UHF reception can be more difficult than VHF.  If you're getting marginal reception of digital signals, both the picture and sound might freeze or break up to the point that it's 10