Insignia NS-L37Q-10A User Manual (English) - Page 15

NS-L37Q_L42Q-10A_10-0783_MAN_V4_English.book Page 11 Thursday, July 15, 2010 4:27 PM Connecting cable TV via a cable TV box 1 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 2 Depending on the jacks available on the cable box, connect a cable from the outgoing jacks on the cable box to the corresponding jacks on the back of your TV. The connection can be to the cable-out, HDMI, component video, S-Video, or AV jack. Back of TV Cable box Connecting a VCR To connect a VCR: 1 Connect an AV cable to the AV IN 1 VIDEO and AV IN 1 L and R audio jacks on the back of your TV. Back of TV VCR HDMI Video or S-Video Component 3 If you use a component video, S-Video, or AV cable, connect an audio cable to the corresponding jacks on the back of your TV and on the cable box. Connecting satellite TV via a satellite TV box To connect satellite TV: 1 Connect the incoming cable from the satellite wall jack to the satellite-in jack on the satellite box. 2 Depending on the jacks available on the satellite TV receiver (set-top box), connect a cable from the outgoing jacks on the satellite box to the corresponding jacks on the back of your TV. The connection can be to the HDMI, component video, S-Video, or AV jack. Back of TV 2 Connect the other end of the cable to the VIDEO OUT and AUDIO OUT jacks on the VCR. Note If a device is connected to the S-VIDEO jack, the S-VIDEO jack controls the AV IN 1 L and R jacks. To assign the audio jacks to the AV IN 1 VIDEO jack, unplug the S-Video device. 3 Turn on your TV, then turn on the VCR. 4 Press INPUT to open the Source List, then press or to select AV1. 5 Insert a videotape into the VCR, then press PLAY. Satellite receiver HDMI Video or S-Video Component 3 If you use a component video, S-Video, or AV cable, connect an audio cable to the corresponding jacks on the back of your TV and on the satellite box. www.insigniaproducts.com 11