Insignia NS-P502Q-10A User Manual (English) - Page 22

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 18 Friday, March 20, 2009 3:11 PM Selecting a channel To select a channel: • Press CH or CH to go to the next higher or lower channel in the channel list. • Press the number buttons to directly select a channel. For example, if you want to view channel 27, press 2, then press 7. Your TV goes to the channel in a few seconds. If you want to go to the channel quicker, enter the channel number, then press ENTER. • Press RECALL to go to the last viewed channel. • Press the number buttons for a main DTV channel, press -, then press the number for a DTV sub-channel to go to a digital sub-channel (if available). For example, to go to sub-channel 1 of main channel 7, press 7, -, then 1. Notes • • In cable mode, HD appears if your TV is receiving a digital high-definition signal. SD appears if your TV is receiving a standard-definition signal. You can press the number buttons to go to a channel that was skipped in the channel scanning. Adjusting the volume To adjust the volume: • Press VOL - or VOL + to decrease or increase the volume. • Press MUTE to turn off the sound. Press MUTE again (or press VOL- or VOL+) to turn the sound back on. Displaying additional information To display additional information: 1 Press DISPLAY. Your TV displays status information, such as the channel number, type of sound, and picture and sound settings. TV #1 DTV Air Dolby Digital 13-1 Fri, Dec 19 2:05 am M. Spillane's Mike Hammer Bonocrunch 1:55 am - 2:55 am 2 To close the display, press DISPLAY again or wait about 10 seconds. Adjusting the picture Note Unless otherwise noted, all tasks in this section are based on using the remote control. Adjusting the TV picture To adjust the picture: 1 Press MENU. The on-screen menu opens with Picture highlighted. Picture Mode Sound Channel Contrast Brightness Sharpness Setup Input Color Tint (G/R) : Standard : 95 : 45 : 50 : 50 : G50/R50 2 Press ENTER to access the Picture menu. 3 Press or to highlight an option, then press ENTER to access the option. Note You may need to press options. to see all the You can select: • Mode-Selects the picture mode. You can select: • Dynamic-Selects a high-definition picture for bright environments. • Standard-Selects the optimal picture display for normal environments. This setting is convenient for most situations. • Movie-Selects a comfortable picture display for dark environments. Note You can also press PICTURE one or more times to select the picture mode. • Contrast-Adjusts the contrast. • Brightness-Adjusts the brightness. • Sharpness-Adjusts the sharpness. • Color-Adjusts the color saturation. • Tint (G/R)-Adjusts the intensity of red in the picture. • Picture Options-Press ENTER to open a list of advanced picture options. For more information, see "Adjusting advanced picture settings" on page 19. • Picture Reset-Resets all picture settings to the default settings. Press ENTER to reset picture settings. 18 www.insigniaproducts.com