Insignia NS-PMM6230 User Guide - Page 7
STEP 2-Option 1: Attaching your monitor mount to a desktop edge, Option 2:
View all Insignia NS-PMM6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
NS-PMM6230 STEP 2-Option 1: Attaching your monitor mount to a desktop edge Notes: • Make sure that the tabletop or desktop is square or rectangular. Your mount may not fit securely to an oval or irregularly shaped surface. • Make sure that the tabletop or desktop thickness is between .8 and 2.2 inches (2 and 5.5 cm). If you want to install your monitor mount through a desktop grommet hole, see STEP 2-Option 2: Attaching your mount through a desktop grommet hole on page 9. Select the position on the desk where you want your monitor mount installed. Make sure that there is enough room for the monitors. The desk should be between .8 in. (2 cm) and 2 in. (5 cm) thick and strong enough to bear the weight of your monitor. Note: You need a Phillips screwdriver for this step. 1 Insert the tube bottom cover (10) into the base support plate (11), then insert the support tube (9) into the tube bottom cover. Make sure that the holes on the bottom cover and the plate are aligned. Secure the assembly using the M4 × 16 mm screw (E). 2 Insert the M10 × 20 mm screw (F) through the bottom of the base support plate, then tighten the screw using the 6 × 6 Allen wrench (H). www.insigniaproducts.com 7