Insignia NS-SB316 User Manual English - Page 14

NS-SB316 Connecting your soundbar using Bluetooth Before you can use your soundbar with a Bluetooth device, you need to pair your device to the soundbar. Notes • • Your soundbar must be on to make a Bluetooth connection. Place the Bluetooth device within 30 ft. (10 m) of your soundbar. Pairing your devices 1 Select Bluetooth as the input source by pressing the (Bluetooth) button on the remote control or the (source) button on the soundbar. The Bluetooth indicator on the soundbar blinks slowly. 2 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For additional information on pairing your device, see your device's documentation. 3 On your Bluetooth device, select "NS-SB316" from the device list. Repeat steps 1-2 if "NS-SB316" is not displayed. 4 If a PIN code is requested, enter "0000." 5 When pairing is completed the Bluetooth indicator on the top of your soundbar turns on. Notes • • • Some devices, such as an iPhone, connect immediately after pairing so the Bluetooth indicator on your soundbar remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this instance, the Bluetooth indicator continues to blink until a connection is established. Your soundbar saves pairing information for up to eight devices. However, it can only be connected and play content from one device at a time. When you turn on your soundbar, it automatically connects to the last connected device if that device is in range. To connect to a different paired device, turn off Bluetooth or unpair from the currently paired device and manually connect to the other paired device. Disconnecting your devices • Turn off the Bluetooth function on your device. 14 www.insigniaproducts.com