Insignia NS-SB316 User Manual English - Page 18
soundbar on the screws., 8 6.35 to 9.5 mm.
View all Insignia NS-SB316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
NS-SB316 6 Secure two screws (not included) to the wall or wall anchors (if required). The screws must protrude from the wall by about ¼" (6.35 mm). Use a #10 wood screw (or similar), 1½" (3.8 cm) in length. The screw width must be about 3/16" (4.76 mm) and the screw head must be approximately ¼" to 3/8" (6.35 to 9.5 mm). 20.43" (51.9 cm) Approx. ¼" (6.8 mm) Wall 7 Align the speaker hanging brackets with the screws, then hang the soundbar on the screws. Warning Improper installation can result in serious injury or damage to your soundbar. If necessary, seek the assistance of a professional. 18 www.insigniaproducts.com
18
NS-SB316
www.insigniaproducts.com
6
Secure two screws (not included) to the wall or wall anchors (if required).
The screws must protrude from the wall by about ¼" (6.35 mm). Use a #10
wood screw (or similar), 1½" (3.8 cm) in length. The screw width must be
about 3/16" (4.76 mm) and the screw head must be approximately ¼" to
3/8" (6.35 to 9.5 mm).
7
Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
Warning
Improper installation can result in serious injury or
damage to your soundbar. If necessary, seek the
assistance of a professional.
Approx.
¼
"
(6.8 mm)
Wall
20.43
"
(51.9 cm)