Insignia NS-SBAR User Manual (English) - Page 10

NS-SBAR Soundbar Home Theater System Muting the sound Press the MUTE button on the remote control or on the soundbar to mute the sound. Press the Volume + button or the MUTE button to restore sound. Selecting Inputs To choose from the available inputs of the soundbar, press the INPUT button on the remote control or on the top of the soundbar. To select wireless audio sources on the Rocket Boost network use the Wireless Next Source button on the remote control or on the soundbar. Note Only available when a Rocketboost card is installed. Adjusting Audyssey Dynamic Volume Audyssey Dynamic Volume removes volume spikes, such as blaring commercials or movie explosions and turns up soft dialogue so it is easier to hear. Three levels of dynamic volume help you adjust to different listening situations. • Audyssey Dynamic Volume Light-This should be used when you want to watch a movie with the family. It will only tame the very loudest explosions and boost only the very quietest dialogue. • Audyssey Dynamic Volume Medium-We recommend this as the default choice. This level is good for typical television viewing. The volume of commercials and stations will sound the same. • Audyssey Dynamic Volume Heavy-This has the greatest impact on the volume. This is most helpful when watching movies or television late at night, while others are sleeping. Explosions are dramatically reduced while the quiet moments are increased. Using Rocketboost When you see the Rocketboost logo on any product, it has been designed to work with other Rocketboost products, no matter who manufactures them. How can I use Rocketboost with the soundbar? After you install the Rocketboost Wireless Card (RF-RBCARD, sold separately) the soundbar can receive any Rocketboost audio stream from your other Rocketboost products. For example, you can play music from audio sources that are in other rooms. Plus, the Rocketboost Wireless card can be used to send audio from the soundbar. For example, you can connect your subwoofer, by using Rocketboost wireless instead of wires. You can learn more about Rocketboost products at www.rocketboost.com. Initial Rocketboost setup Remove the front speaker grill cover from the soundbar and insert a Rocketboost Wireless Card (RF-RBCARD, sold separately). To remove the grill cover, grip the glossy edges of the grill cover with each hand and pull forward evenly. The card connector is keyed so it can only be installed one way. When inserting the card, make sure that it is oriented so the Rocketboost logo on the card is facing you. Note Every Rocketboost network must contain a device called a Hub, which directs network data traffic and helps devices join the network. The network can have only one hub, which is selected using the Hub Status switch on the back of all Rocketboost senders. If you are setting up your network for the first time choose one of your Rocketboost senders to be your hub by setting the Hub Status switch to Enable. For example, if you want the soundbar to be the hub, set the Hub Status switch on the soundbar to Enable. If you already have a Rocketboost network established, set the Hub Status switch on the soundbar to Disable. The soundbar Power indicator lights green if the soundbar Hub Status switch is Enabled, and lights blue if the soundbar Hub Status switch is Disabled. Note Every new Rocketboost device you add to your Rocketboost network must be "joined" to your Rocketboost hub device. To establish communications with other Rocketboost devices: 1 If possible, bring your existing Rocketboost Hub device, or the new Rocketboost device to which you'd like to join into the same room as the soundbar. 2 Press the Power button on the soundbar to turn it on. 3 Press the Power button on your other Rocketboost device to turn it on. 4 Press and hold the Power/Join button on the soundbar to initiate joining mode, then press and hold the Power/Join button on your other Rocketboost device (the devices will remain in joining mode for 30 seconds). The power indicator LEDs on both products will begin blinking rapidly. • When successfully joined, the power indicator LEDs on both products will stop blinking and stay on. • If joining fails after 30 seconds, the power indicator LED on the soundbar will begin flashing at a slower rate. If this occurs, repeat the above steps. Listening to music from other Rocketboost products To listen to music from other Rocketboost products: 1 Press the Power button on the soundbar to turn it on. www.insigniaproducts.com 7