Insignia NS-SBAR User Manual (English) - Page 9

NS-SBAR Soundbar Home Theater System 3 Turn on your subwoofer. Note With the Rocketboost Ready card accessory installed (sold separately), you can use Rocketboost to connect to a Rocketboost enabled subwoofer. See "Using Rocketboost" on page 7, for more information. Connecting power To connect power to your soundbar: 1 Connect the power supply to the power supply jack on the soundbar. 2 Connect one end of the AC power cable to the power supply and then plug the other end into a power outlet. The standby indicator on the soundbar turns on. Installing the wall mount bracket You can use the included wall mount brackets (A and B) to mount this soundbar on a wall. Warning Improper installation can result in serious injury or damage to your soundbar. If necessary, please seek the assistance of a professional. To install the soundbar on a wall: 1 Secure bracket parts A to the soundbar with screws (included). A A Wall B A Soundbar Installing the soundbar feet If you do not mount the soundbar to a wall, you will need to attach the feet (included) to the soundbar, so that it will sit evenly on a flat surface. To install the soundbar feet: 1 Turn the soundbar over. 2 Remove the protective paper from the soundbar feet (2) to reveal the adhesive strip. 3 Align the posts on the soundbar feet with the holes in the bottom of the soundbar, then press the soundbar feet onto the bottom of the soundbar Soundbar Soundbar foot A 2 Use the bracket template to determine position on wall for bracket parts B. Secure bracket parts B to the wall with four screws (not included). You must use suitable wall anchors if you are mounting on drywall, concrete, or other wall types. Wall B B 3 Fit the soundbar to the wall by sliding it down and making sure of a secure fit between bracket parts A and B. B Wall B A Soundbar A Soundbar foot Using your soundbar Turning on the power • Press the Power button on the top of the unit or press the Power button on the remote control to turn on the soundbar. • Press the Power button on the top of the unit or press the Power button on the remote control to put the soundbar in Standby mode. Adjusting the Volume Press the Volume Up button to increase the volume or the Volume Down button to decrease the volume. - OrUsing the remote control, press the Volume + button to increase the volume or the Volume - button to decrease the volume. 6 www.insigniaproducts.com