Intel 630 User Manual - Page 18

Expansion Cards

Get Intel 630 - Pentium 4 630 3.0GHz 800MHz 2MB Socket 775 CPU PDF manuals and user guides
UPC - 683728086404
View all Intel 630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

DIMM1 (BANK0+BANK1) DIMM2 (BANK2+BANK3) Figure 2-4 NOTE! When you install DIMM module fully into the DIMM socket the eject tab should be locked into the DIMM module very firmly and fit into its indention on both sides. WARNING! For the SDRAM CLOCK is set at 133MHz, use only PC133compliant DIMMs. When this motherboard operate at 133Mhz, most system will not even boot if non-compliant modules are used because of the strict timing issues, if your DIMM are not PC133compliant, set the SDRAM clock to 100MHz to ensure system stability. 2-5 Expansion Cards WARNING! Turn off your power when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards. 2-5-1 Procedure For Expansion Card Installation 1. Read the documentation for your expansion card and make any necessary hardware or software setting for your expansion card such as jumpers. 2. Remove your computer's cover and the bracket plate on the slot you intend to use. 3. Align the card's connectors and press firmly. 4. Secure the card on the slot with the screen you remove above. 5. Replace the computer system's cover. 6. Set up the BIOS if necessary. 7. Install the necessary software driver for your expansion card. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
15
DIMM2 (BANK2+BANK3)
DIMM1 (BANK0+BANK1)
NOTE!
When you install DIMM module fully into the DIMM socket the eject
tab should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING!
For the SDRAM CLOCK is set at 133MHz, use only PC133-
compliant DIMMs.
When this motherboard operate at 133Mhz,
most system will not even boot if non-compliant modules are used
because of the strict timing issues, if your DIMM are not PC133-
compliant, set the SDRAM clock to 100MHz to ensure system
stability.
2-5
Expansion Cards
WARNING!
Turn off your power when adding or removing expansion cards or
other system components.
Failure to do so may cause severe
damage to both your motherboard and expansion cards.
2-5-1
Procedure For Expansion Card Installation
1. Read the documentation for your expansion card and make any necessary
hardware or software setting for your expansion card such as jumpers.
2. Remove your computer’s cover and the bracket plate on the slot you intend to
use.
3. Align the card’s connectors and press firmly.
4. Secure the card on the slot with the screen you remove above.
5. Replace the computer system’s cover.
6. Set up the BIOS if necessary.
7. Install the necessary software driver for your expansion card.
Figure 2-4