Intel 630 User Manual - Page 40
PM Wake up Events
![]() |
UPC - 683728086404
View all Intel 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Video Off Method This determines the manner in which the monitor is blanked. DPMS (default) Initial display power management signaling. Blank Screen This option only writes blanks to the video buffer. V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. Modem Use IRQ This determines the IRQ in which the MODEM can use. The settings are: 3, 4, 5, 7, 9, 10, 11, NA. Power Button Function Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The settings are: Delay 4 Sec, Instant-Off. PM Wake-Up Events Please refer to section 3-8-1 3-8-1 PM Wake up Events CMOS Setup Utility - Copyright(C) 1984-2000 Award Software PM Wake Up Events IRQ [3-7,9-15],NMI IRQ 8 Break Suspend Ring Power Up Control MACPME Power Up Control PCIPME Power Up Control KB Power ON Password Power Up by Alarm x Month Alarm x Day of Month Alarm x Time (hh:mm:ss) Alarm Enabled Disabled Disabled Disabled Disabled Enter Disabled NA 0 0 : 0 : 0 Item Help Menu Level >> Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults F7:Standard Defaults Ring Power Up Control During Disabled, the system will ignore any incoming call from the modem. During Enabled, the system will boot up if there's an incoming call from the modem. MACPME Power Up Control During Disabled, the system will ignore any incoming call from the EtherNet controller. During Enabled, the system will boot up if there's an incoming call from the EtherNet controller. 37
![](/manual_guide/products/intel-630-user-manual-dc16064/40.png)