Intel BLKD201GLY2A Product Specification - Page 45
Front Panel Audio Header/Jumper Block
![]() |
View all Intel BLKD201GLY2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Technical Reference 2.3.1 Front Panel Audio Header/Jumper Block This connector has two functions: • With jumpers installed, the audio line out and mic in signals are routed to the back panel audio connectors. • With jumpers removed, the connector provides audio line out and mic in signals for front panel audio headers. Table 19 describes the two configurations of this header/jumper block. CAUTION Do not place jumpers on this block in any configuration other than the one described in Table 19. Other jumper configurations are not supported and could damage the Desktop Board. Table 19. Front Panel Audio Header/Jumper Block Jumper Setting 5 and 6 9 and 10 Configuration Audio line out and mic in signals are routed to the back panel audio connectors. The back panel audio connectors are shown in Figure 7 on page 37. No jumpers Table 12 on page 39 lists the names of the signals available on this installed connector when no jumpers are installed. # INTEGRATOR'S NOTE When the jumpers are removed and this connector is used for front panel audio, the back panel audio line out and mic in connectors are disabled. 45
![](/manual_guide/products/intel-blkd201gly2a-product-specification-76a2ed7/45.png)