Intel D815EEA2U Product Guide - Page 89
Intel D815EEA2U - P3 Socket 370 ATX Motherboard Manual
![]() |
UPC - 735858146135
View all Intel D815EEA2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Error Messages and Indicators Table 34. BIOS Error Messages (continued) Explanation Memory size has decreased since the last boot. If no memory was removed, then memory may be bad. Memory size has increased since the last boot. If no memory was added, there may be a problem with the system. Memory size has changed since the last boot. If no memory was added or removed, then memory may be bad. System did not find a device to boot. A parity error occurred on an off-board card. This error is followed by an address. A parity error occurred in onboard memory. This error is followed by an address. A parity error occurred in onboard memory at an unknown address. NVRAM, CMOS, and passwords have been cleared. The system should be powered down and the jumper removed. CMOS is ignored and NVRAM is cleared. User must enter Setup. Error Message Memory Size Decreased Memory Size Increased Memory Size Changed No Boot Device Available Off Board Parity Error On Board Parity Error Parity Error NVRAM/CMOS/PASSWORD cleared by Jumper Pressed 89
![](/manual_guide/products/intel-d815efv-product-guide-17717bc/89.png)