Intel D845GLVA Product Specification - Page 33
Hardware Management Subsystem - lan drivers
View all Intel D845GLVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Product Description Table 10. LAN Connector LED States LED Color Green Yellow LED State Off On Off On (steady state) On (brighter and pulsing) Condition 10 Mbit/sec data rate is selected. 100 Mbit/sec data rate is selected. LAN link is not established. LAN link is established. The computer is communicating with another computer on the LAN. 1.11.3 LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. For information about Obtaining LAN software and drivers Refer to Section 1.3, page 16 1.12 Hardware Management Subsystem The hardware management features enable the boards to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Fan monitoring (through the I/O controller) • Thermal and voltage monitoring • Chassis intrusion detection For information about The WfM specification Refer to Section 1.5, page 17 1.12.1 Hardware Monitoring ASIC (Optional) The features of the hardware monitoring ASIC include: • Internal ambient temperature sensor • Remote thermal diode sensor for direct monitoring of processor temperature • Power supply monitoring of four voltages (+5 V, +3.3 VSB, +1.5 V, and +VCCP) to detect levels above or below acceptable values • SMBus interface 1.12.2 Fan Monitoring Fan monitoring can be implemented using Intel® LANDesk Client Manager or third-party software. For information about The functions of the fan connectors Refer to Section 1.13.2.2, page 38 33