Home » Intel Manuals » Motherboards » Intel D845PT » Manual Viewer

Intel D845PT Product Specification - Page 28

USB 2.0 Support Optional - audio drivers

Get Intel D845PT PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Intel Desktop Board D845BG/D845PT Technical Product Specification 1.8.2.2 USB 2.0 Support (Optional) ✏ NOTE The USB 2.0 option is currently available only on the D845BG board. All D845BG boards with the NEC µPD720100 USB 2.0 host controller have only five PCI bus connectors. The D845BG board supports USB 2.0 using the NEC µPD720100 USB 2.0 host controller, which is a manufacturing option. The port routing is implemented as shown in Figure 7. The NEC µPD720100 controller is connected through the PCI bus and provides support for up to five USB ports: • Two ports implemented with stacked back panel connectors, adjacent to the audio connectors • Two ports routed to the front panel USB connector • One port accessible through the CNR connector For more than five USB devices, an external hub can be connected to any of the ports. D845BG boards with the USB 2.0 option fully support OHCI and EHCI and use OHCI- and EHCI-compatible drivers. ✏ NOTE The USB 2.0 option requires an operating system that officially supports USB 2.0. USB 2.0 support has been tested with Windows 2000 and Windows XP drivers and is not currently supported by any other operating system. NEC µPD720100 PCI USB 2.0 Host Controller USB USB ports (2) CNR connector USB ports (2) Back panel USB connectors adjacent to the audio connectors USB port accesible through a USB connector on an optional CNR add-in card Front panel USB connectors Figure 7. USB 2.0 Port Configuration (Optional) OM12337 28

Section	Page
Intel® Desktop Board D845BG/D845PT Technical Product Specification	1
Revision History / Disclaimer	2
Preface	3
Intended Audience	3
What This Document Contains	3
Typographical Conventions	3
Notes, Cautions, and Warnings	3
Other Common Notation	4
Contents	5
1 Product Description	11
1.1 Board Differences	11
1.2 Overview	12
1.2.1 Feature Summary	12
1.2.2 Manufacturing Options	13
1.2.3 Board Layouts	14
1.2.4 Block Diagram	16
1.3 Online Support	18
1.4 Operating System Support	18
1.5 Design Specifications	19
1.6 Processor	22
1.7 System Memory	23
1.8 Intel® 845 Chipset	25
1.8.1 AGP	26
1.8.2 USB	27
1.8.3 IDE Support	29
1.8.4 Real-Time Clock, CMOS SRAM, and Battery	30
1.8.5 Intel® 82802AB 4 Mbit Firmware Hub (FWH)	30
1.9 I/O Controller	30
1.9.1 Serial Ports	31
1.9.2 Parallel Port	31
1.9.3 Diskette Drive Controller	32
1.9.4 Keyboard and Mouse Interface	32
1.10 Audio Subsystem	33
1.10.1 Audio Connectors	34
1.10.2 Audio Subsystem Software	34
1.11 LAN Subsystem (Optional)	35
1.11.1 Intel® 82562ET Platform LAN Connect Device	35
1.11.2 RJ-45 LAN Connector with Integrated LEDs	35
1.11.3 LAN Subsystem Software	36
1.12 CNR (Optional)	36
1.13 Hardware Management Subsystem	37
1.13.1 Hardware Monitor Component	37
1.13.2 Fan Monitoring	37
1.13.3 Chassis Intrusion and Detection	38
1.14 Power Management	38
1.14.1 ACPI	38
1.14.2 Hardware Support	42
2 Technical Reference	47
2.1 Introduction	47
2.2 Memory Map	47
2.3 I/O Map	48
2.4 DMA Channels	50
2.5 PCI Configuration Space Map	50
2.6 Interrupts	51
2.7 PCI Interrupt Routing Map	52
2.8 Connectors	54
2.8.1 Back Panel Connectors	55
2.8.2 Internal I/O Connectors	58
2.8.3 External I/O Connectors	71
2.9 Jumper Blocks	75
2.9.1 Front Panel Audio Connector/Jumper Block	75
2.9.2 BIOS Setup Configuration Jumper Block	76
2.10 Mechanical Considerations	77
2.10.1 D845BG Form Factor	77
2.10.2 D845PT Form Factor	78
2.10.3 I/O Shield	79
2.11 Electrical Considerations	82
2.11.1 Power Consumption	82
2.11.2 Add-in Board Considerations	82
2.11.3 Standby Current Requirements	83
2.11.4 Fan Connector Current Capability	84
2.11.5 Power Supply Considerations	84
2.12 Thermal Considerations	85
2.13 Reliability	87
2.14 Environmental	87
2.15 Regulatory Compliance	88
2.15.1 Safety Regulations	88
2.15.2 EMC Regulations	88
2.15.3 Product Certification Markings (Board Level)	89
3 Overview of BIOS Features	91
3.1 Introduction	91
3.2 BIOS Flash Memory Organization	92
3.3 Resource Configuration	92
3.3.1 PCI Autoconfiguration	92
3.3.2 PCI IDE Support	92
3.4 System Management BIOS (SMBIOS)	93
3.5 Legacy USB Support	93
3.6 BIOS Updates	94
3.6.1 Language Support	95
3.6.2 Custom Splash Screen	95
3.7 Recovering BIOS Data	95
3.8 Boot Options	96
3.8.1 CD-ROM and Network Boot	96
3.8.2 Booting Without Attached Devices	96
3.9 Fast Booting Systems with Intel Rapid BIOS Boot	96
3.9.1 Peripheral Selection and Configuration	96
3.9.2 Intel Rapid BIOS Boot	97
3.10 BIOS Security Features	98
4 BIOS Setup Program	99
4.1 Introduction	99
4.2 Maintenance Menu	100
4.2.1 Extended Configuration Submenu	101
4.3 Main Menu	102
4.4 Advanced Menu	103
4.4.1 PCI Configuration Submenu	104
4.4.2 Boot Configuration Submenu	105
4.4.3 Peripheral Configuration Submenu	106
4.4.4 IDE Configuration Submenu	108
4.4.5 Diskette Configuration Submenu	111
4.4.6 Event Log Configuration Submenu	112
4.4.7 Video Configuration Submenu	113
4.5 Security Menu	114
4.6 Power Menu	115
4.6.1 ACPI Submenu	116
4.7 Boot Menu	117
4.7.1 Boot Device Priority Submenu	118
4.7.2 Hard Disk Drives Submenu	119
4.7.3 Removable Devices Submenu	119
4.7.4 ATAPI CD-ROM Drives Submenu	120
4.8 Exit Menu	120
5 Error Messages and Beep Codes	121
5.1 BIOS Error Messages	121
5.2 Port 80h POST Codes	123
5.3 Bus Initialization Checkpoints	127
5.4 Speaker	128