Intel D845PT Product Specification - Page 74
Power Switch Connector
View all Intel D845PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Intel Desktop Board D845BG/D845PT Technical Product Specification Table 46. States for a Two-Color Power LED LED State Off Steady Green Blinking Green Steady Yellow Blinking Yellow Description Power off Running Running/message waiting Sleeping Sleeping/message waiting ✏ NOTE To use the message waiting function, ACPI must be enabled in the operating system and a message-capturing application must be invoked. 2.8.3.2.4 Power Switch Connector Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the D845BG/D845PT board.) At least two seconds must pass before the power supply will recognize another on/off signal. 74