Intel D850MD Product Guide - Page 32
Installing and Removing an AGP Card Retention Mechanism and Card
UPC - 735858147149
View all Intel D850MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Intel Desktop Boards D850MD and D850MV Product Guide Installing and Removing an AGP Card Retention Mechanism and Card The AGP connector supports 1.5 V 4X and 2X AGP cards. Newer cards have a retention notch as shown in Figure 14. When using notched cards, install the AGP card retention mechanism (RM) before installing a card. The AGP card RM is not used with unnotched cards. To install and remove an AGP card RM and card, follow the instructions under these headings: • Installing the AGP card RM • Installing an AGP card • Removing the AGP card from the RM • Removing the AGP card RM Installing the AGP Card Retention Mechanism CAUTION Install the AGP card RM only when using an AGP card with a retention notch (A) as shown in Figure 14. Use of the RM with an unnotched card may impair video operation. If you need to remove the RM, follow the instructions on page 35. ✏ NOTE All D850MD and D850MV boxed desktop boards may not include an AGP RM. Skip to the Installing an AGP Card heading on page 34 if your boxed desktop board does not include an AGP RM. A OM10592 Figure 14. AGP Card with a Retention Notch 32