Intel D850MD Product Guide - Page 34

Installing an AGP Card, Removing the AGP Card from the Retention Mechanism, - d850mv front panel pins

Get Intel D850MD - Desktop Board Motherboard PDF manuals and user guides
UPC - 735858147149
View all Intel D850MD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Intel Desktop Boards D850MD and D850MV Product Guide Installing an AGP Card Follow these instructions to install an AGP card: 1. Place the AGP card in the AGP connector. 2. Press down on the card until it is completely seated in the AGP connector and the card retention notch snaps into place around the AGP card RM pin. 3. Secure the card's metal bracket to the chassis back panel with a screw. Removing the AGP Card from the Retention Mechanism Follow these instructions to remove an AGP card from the AGP card RM: 1. Remove the screw (B) that secures the card's metal bracket (A) to the chassis back panel. 2. Push back on the RM lever (D), as shown in Figure 16, until the retention pin (C) completely clears the notch in the card. 3. Pull the card straight up (E). B E A C D Figure 16. Removing the AGP Card OM10595 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Intel Desktop Boards D850MD and D850MV Product Guide
34
Installing an AGP Card
Follow these instructions to install an AGP card:
1.
Place the AGP card in the AGP connector.
2.
Press down on the card until it is completely seated in the AGP connector and the card
retention notch snaps into place around the AGP card RM pin.
3.
Secure the card
’
s metal bracket to the chassis back panel with a screw.
Removing the AGP Card from the Retention Mechanism
Follow these instructions to remove an AGP card from the AGP card RM:
1.
Remove the screw (B) that secures the card
’
s metal bracket (A) to the chassis back panel.
2.
Push back on the RM lever (D), as shown in Figure 16, until the retention pin (C) completely
clears the notch in the card.
3.
Pull the card straight up (E).
OM10595
A
B
C
D
E
Figure 16.
Removing the AGP Card