Intel D865GSA Intel Desktop Board D865GSA Product Guide English - Page 41
Connecting to the USB 2.0 Header, Connecting to the Front Panel Header
View all Intel D865GSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing and Replacing Desktop Board Components Connecting to the USB 2.0 Header Before connecting to the USB 2.0 header, observe the precautions in "Before You Begin" on page 23. See Figure 20, C on page 39 for the location of the black USB 2.0 header. Table 8 shows the pin assignments for the USB 2.0 header. Table 8. USB 2.0 Header Signal Names USB Port A Pin Signal Name 1 POWER 3 D- 5 D+ 7 GND 9 KEY Note: USB ports may be assigned as needed. USB Port B Pin Signal Name 2 POWER 4 D- 6 D+ 8 GND 10 NO CONNECT Connecting to the Front Panel Header Before connecting to the front panel header, observe the precautions in "Before You Begin" on page 23. See Figure 20, D on page 39 for the location of the multi-colored front panel header. Table 9 shows the pin assignments for the front panel header. Table 9. Front Panel Header Signal Names Pin Signal In/Out Description Hard Drive Activity LED (Orange) 1 HD_PWR Out Hard disk LED pullup (330 Ω) to +5 V 3 HDA# Out Hard disk active LED Reset Switch (Blue) Pin Signal In/Out Description Power LED (Green) 2 HDR_BLNK_GRN Out Front panel green LED 4 HDR_BLNK_YEL Out Front panel yellow LED On/Off Switch (Red) 5 GND Ground 7 FP_RESET# In Reset switch Power (Black) 9 +5V Power 6 SWITCH_ON# In Power switch 8 GND Ground Not Connected (Black) 10 N/C No pin 41