Intel D865GVHZ Product Guide - Page 39

Setting the BIOS Configuration Jumper Block

Get Intel D865GVHZ - Desktop Board - Mainboard PDF manuals and user guides
UPC - 675900599772
View all Intel D865GVHZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Installing and Replacing Desktop Board Components Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the desktop board's BIOS configuration jumper is shown in Figure 12. 13 OM17029 Figure 12. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 8 shows the jumper settings for the Setup program modes. Table 8. Jumper Settings for the BIOS Setup Program Modes Jumper Setting 13 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. 13 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. 13 Recovery (None) The BIOS recovers data from a recovery diskette in the event of a failed BIOS update. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Installing and Replacing Desktop Board Components
39
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper.
Moving the jumper with the power on may result in unreliable computer operation.
The location of the desktop board’s BIOS configuration jumper is shown in Figure 12.
OM17029
1
3
Figure 12.
Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 8 shows the jumper settings for the Setup program modes.
Table 8.
Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
Mode
Description
3
1
Normal (default) (1-2)
The BIOS uses the current configuration and passwords for
booting.
3
1
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS displays
the Maintenance Menu.
Use this menu to clear passwords.
3
1
Recovery (None)
The BIOS recovers data from a recovery diskette in the event
of a failed BIOS update.