Intel DC3217IYE Technical Product Specification - Page 43
Power Supply Connectors, 2.2.4, Front Panel Header
View all Intel DC3217IYE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • External Power Supply - the board can be powered through a 19 V DC connector on the back panel. The back panel DC connector is compatible with a 5.5 mm/OD (outer diameter) and 2.5 mm/ID (inner diameter) plug, where the inner contact is +19 (±10%) V DC and the shell is GND. The maximum current rating is 10 A. • Internal Power Supply - the board can alternatively be powered via the internal 19 V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +19 (±10%) VDC. Table 14. 19 V Internal Power Supply Connector Pin Signal Name 1 Ground 2 +19 V (±10%) For information about Power supply considerations Refer to Section 2.5.1, page 49 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 15 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 15. Front Panel Header Pin Signal Name Description 1 HDD_POWER_LED Pull-up resistor (750 Ω) to +5V 3 HDD_LED# [Out] Hard disk activity LED 5 GROUND Ground 7 RESET_SWITCH# [In] Reset switch 9 +5V_DC Power Pin Signal Name 2 POWER_LED_MAIN 4 POWER_LED_ALT 6 POWER_SWITCH# 8 GROUND 10 Key Description [Out] Front panel LED (main color) [Out] Front panel LED (alt color) [In] Power switch Ground No pin 43