Intel DQ57TM Intel Desktop Board DQ57TM Product Guide English - Page 67
Removing the Battery
View all Intel DQ57TM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installing and Replacing Desktop Board Components To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 33). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer's power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 29). 5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note the orientation of the "+" and "-" on the battery. 6. Install the new battery in the connector, orienting the "+" and "-" correctly. 7. Replace the computer cover. Figure 29. Removing the Battery 67
Installing and Replacing Desktop Board Components
67
To replace the battery, follow these steps:
1.
Observe the precautions in "Before You Begin" (see page 33).
2.
Turn off all peripheral devices connected to the computer.
Disconnect the
computer’s power cord from the AC power source (wall outlet or power adapter).
3.
Remove the computer cover.
4.
Locate the battery on the board (see Figure 29).
5.
With a medium flat-bladed screwdriver, gently pry the battery free from its
connector.
Note the orientation of the “+” and “-” on the battery.
6.
Install the new battery in the connector, orienting the “+” and “-” correctly.
7.
Replace the computer cover.
Figure 29.
Removing the Battery