Intel DQ67SW English Product Guide - Page 48
Removing a PCI Express x16 Graphics Card,
View all Intel DQ67SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Intel Desktop Board DQ67SW Product Guide Removing a PCI Express x16 Graphics Card Follow these instructions to remove a PCI Express x16 graphics card from a connector: 1. Observe the precautions in "Before You Begin" on page 33. 2. Disconnect the monitor cable from the graphics card back panel connector. 3. Remove the screw (Figure 19, A) that secures the card's metal bracket to the chassis back panel. 4. Push the card ejector lever down using the tip of a pencil or similar tool (Figure 19, B) in the notch. This will release the card from the connector (C). 5. Pull the card straight up to remove it. Figure 19. Removing a PCI Express x16 Graphics Card 48
Intel Desktop Board DQ67SW Product Guide
48
Removing a PCI Express x16 Graphics Card
Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1.
Observe the precautions in "Before You Begin" on page 33.
2.
Disconnect the monitor cable from the graphics card back panel connector.
3.
Remove the screw (Figure 19, A) that secures the card’s metal bracket to the
chassis back panel.
4.
Push the card ejector lever down using the tip of a pencil or similar tool
(Figure 19, B) in the notch.
This will release the card from the connector (C).
5.
Pull the card straight up to remove it.
Figure 19.
Removing a PCI Express x16 Graphics Card