Intel DZ68ZV Technical Product Specification - Page 52

Power Supply Connectors

Get Intel DZ68ZV PDF manuals and user guides View all Intel DZ68ZV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Intel Desktop Board DZ68ZV Technical Product Specification 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the rightmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • Processor core power - a 2 x 4 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. Table 18. Processor Core Power Connector Pin Signal Name Pin Signal Name 1 Ground 3 Ground 5 Ground 7 Ground 2 +12 V 4 +12 V 6 +12 V 8 +12 V Table 19. Main Power Connector Pin Signal Name 1 +3.3 V Pin Signal Name 13 +3.3 V 2 +3.3 V 14 -12 V 3 Ground 4 +5 V 5 Ground 6 +5 V 15 Ground 16 PS-ON# (power supply remote on/off) 17 Ground 18 Ground 7 Ground 8 PWRGD (Power Good) 9 +5 V (Standby) 10 +12 V 11 +12 V (Note) 12 2 x 12 connector detect (Note) 19 Ground 20 No connect 21 +5 V 22 +5 V 23 +5 V (Note) 24 Ground (Note) Note: When using a 2 x 10 power supply cable, this pin will be unconnected. For information about Power supply considerations Refer to Section 2.5.1 on page 59 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Intel Desktop Board DZ68ZV Technical Product Specification
52
2.2.2.3
Power Supply Connectors
The board has the following power supply connectors:
•
Main power
– a 2 x 12 connector.
This connector is compatible with 2 x 10
connectors previously used on Intel Desktop boards.
The board supports the use
of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables.
When
using a power supply with a 2 x 10 main power cable, attach that cable on the
rightmost pins of the main power connector, leaving pins 11, 12, 23, and
24 unconnected.
•
Processor core power
– a 2 x 4 connector.
This connector provides power
directly to the processor voltage regulator and must always be used.
Failure to do
so will prevent the board from booting.
Table 18.
Processor Core Power Connector
Pin
Signal Name
Pin
Signal Name
1
Ground
2
+12 V
3
Ground
4
+12 V
5
Ground
6
+12 V
7
Ground
8
+12 V
Table 19.
Main Power Connector
Pin
Signal Name
Pin
Signal Name
1
+3.3 V
13
+3.3 V
2
+3.3 V
14
-12 V
3
Ground
15
Ground
4
+5 V
16
PS-ON# (power supply remote on/off)
5
Ground
17
Ground
6
+5 V
18
Ground
7
Ground
19
Ground
8
PWRGD (Power Good)
20
No connect
9
+5 V (Standby)
21
+5 V
10
+12 V
22
+5 V
11
+12 V
(Note)
23
+5 V
(Note)
12
2 x 12 connector detect
(Note)
24
Ground
(Note)
Note:
When using a 2 x 10 power supply cable, this pin will be unconnected.
For information about
Refer to
Power supply considerations
Section 2.5.1 on page 59