Intel IXM5414E User Guide - Page 97

File Type Specify the type of file to be downloaded to the switch: Code 8051 MCU Code Config SSH RSA1 Key File SSH RSA2 Key PEM File SSH DSA Key PEM File SSL Trusted Root Certificate PEM File SSL Server Certificate PEM File SSL DH Weak Encryption Parameter PEM File SSL DH Strong Encryption Parameter PEM File 8051 MCU Code TFTP Server IP Address Enter the IP address of the TFTP server. The factory default is 0.0.0.0. TFTP File Path This field specifies the directory path on the TFTP server where the file to be downloaded to the switch is located. The switch will retain the last file path used. TFTP File Name This field specifies the name of the file that is to be downloaded to the switch. The switch will remember the last file name used. The last row of the table is used to display information about the progress of the file transfer. The screen will refresh automatically until the file transfer completes. The Intel® Blade Server Ethernet Switch Module IXM5414E software supports the use of a TFTP client. The TFTP client path statement requirement is server dependent. A path statement is generally required to setup the TFTP client; however, the client path may remain blank. See the example of the path setup. TFTP Upload Example: The TFTP upload example details three scenarios for TFTP client-to-server file transfer. Each scenario involves uploading the config.bin file from the switch to the location c:\tftp\ on the server. The different scenarios are detailed below: Table 4. TFTP Upload Scenarios TFTP Server path c:\tftp\ c:\ c: TFTP Client path blank tftp\ \tftp\ Click the Start File Transfer button to apply any changes made to the fields and initiate the download. Click the Apply button to send the updated screen to the switch; this does not perform the file download. Intel® Blade Server Ethernet Switch Module IXM5414E 87