Intel IXM5414E User Guide - Page 98
Upload file from switch, File Type, config, errorlog, msglog, TFTP Server IP Address, TFTP File Path
UPC - 735858185493
View all Intel IXM5414E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Upload file from switch Use this panel to configure the information needed to upload a file from the switch. See the previous menu option "Download file to switch" on page 86 for more information about specifying TFTP File Paths and Names. File Type This field sets the type of file to be uploaded from the switch. The datatype is one of the following: config Configuration file errorlog Error log msglog Message log TFTP Server IP Address Enter the IP address of the TFTP server. The factory default is 0.0.0.0. TFTP File Path This field specifies the directory path on the TFTP server where the file to be uploaded from the switch is to be located. The switch will remember the last file path used. TFTP File Name This field specifies the name of the file that is to be uploaded from the switch. The switch will remember the last file name used. The last row of the table is used to display information about the progress of the file transfer. The screen will refresh automatically until the file transfer completes. Click the Start File Transfer button to apply any changes made to the fields and initiate the upload. Click the Apply button to send the updated screen to the switch; this does not perform the file upload. This command is valid only when the transfer mode is TFTP. 88 Intel® Blade Server Ethernet Switch Module IXM5414E