Intel RMS25PB080 Hardware User's Guide - Page 17

temperature should be less than 55° C. If the ambient temperature exceeds 45° C, the fast charge cycle will terminate prematurely, thus preventing the battery pack from reaching a fully charged state. Intel recommends mounting the battery remotely from the RAID controller when possible to provide additional cooling. Installing the Intel® RAID Smart Battery AXXRSBBU9 To install the Intel® RAID Smart Battery AXXRSBBU9 on the Intel® RAID Controller, you must perform the following steps: 1. Remove the RAID Controller if it is already installed in the server system. For information, see "Removing the RAID Controller" on page 5. 2. Install the Intel® RAID Smart Battery AXXRSBBU9 on the RAID Controller using the following method: - Set up a remote connection through the remote BBU connector. For information, see "Setting up a Remote Connection to the RAID Controller" on page 6. 3. Install the RAID Controller in the server system. For information, see "Installing the Intel® RAID Controller in the Server System" on page 9. Removing the RAID Controller If the RAID controller is already installed in a computer, do the following to remove it before you install the Intel® RAID Smart Battery AXXRSBBU9: 1. Shut down the computer, turn off the power, and unplug the power cord(s). 2. Remove the chassis cover and ground yourself before touching the RAID controller. Carefully unplug all cables connected to the RAID controller. Press the silver spring at the connector end of the data cables to make sure the two tiny catches release. 3. Carefully remove the RAID controller from the server board. For more information on removing add-in cards, refer to the server board documentation. 4. Place the RAID controller on a flat, clean, static-free surface. Installing the Intel® RAID Smart Battery AXXRSBBU9 You can set up a remote connection to the RAID Controller. Intel® RAID Smart Battery AXXRSBBU9 User's Guide 5