Intel RMS25PB080 Hardware User's Guide - Page 21

Attaching the Connecting Cable to the Server System

Get Intel RMS25PB080 PDF manuals and user guides View all Intel RMS25PB080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

AF003678 Figure 5. Engaging Holder Tabs with the Chassis Clips Attaching the Connecting Cable to the Server System Follow the appropriate set of instructions below for your server. 1. Route the cable through the cable holder on the edge of the chassis. 2. Connect the cable to the RAID controller or remote mounting board. Installing the Intel® RAID Controller in the Server System To install the Intel® RAID Controller back into the server system, do the following: 1. Align the RAID controller with the PCI Express* slot. 2. Press down gently, but firmly, to ensure that the RAID controller is properly seated in the slot. The bottom edge of the RAID controller must be flushed with the slot. Intel® RAID Smart Battery AXXRSBBU9 User's Guide 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Intel
®
RAID Smart Battery AXXRSBBU9 User’s Guide
9
Figure 5.
Engaging Holder Tabs with the Chassis Clips
Attaching the Connecting Cable to the Server System
Follow the appropriate set of instructions below for your server.
1.
Route the cable through the cable holder on the edge of the chassis.
2.
Connect the cable to the RAID controller or remote mounting board.
Installing the Intel
®
RAID Controller in the Server System
To install the Intel
®
RAID Controller back into the server system, do the following:
1.
Align the RAID controller with the PCI Express* slot.
2.
Press down gently, but firmly, to ensure that the RAID controller is properly seated in
the slot. The bottom edge of the RAID controller must be flushed with the slot.
AF003678