Intel S5000XVNSATAR Product Specification - Page 30
Minimum Non-Mirrored Mode Configuration
View all Intel S5000XVNSATAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Intel® Workstation Board S5000XVN TPS Functional Architecture 3.1.3.3.1 Minimum Non-Mirrored Mode Configuration The workstation board is capable of supporting a minimum of one DIMM installed. However, for system performance reasons, Intel's recommendation is that at least two DIMMs are installed. The following diagram shows the recommended minimum DIMM memory configuration. Populated DIMM slots are shown in gray. Channel B Channel A Channel C Channel D MCH Branch 0 DIMDMIMDAMIM1DAMIM2DBMIM1DBMIM2DCMIM1DCMIM2DM1D2 Branch 1 TP02300 Figure 13. Minimum 2-DIMM Memory Configuration Note: The workstation board supports single DIMM mode operation. Intel will only validate and support this configuration with a single 512 MB x8 FBDIMM installed in DIMM socket A1. 3.1.3.4 Non-mirrored Mode Memory Upgrades The minimum memory upgrade increment is two DIMMs per branch. The DIMMs must cover the same slot position on both channels. DIMMs pairs must be identical with respect to size, speed, and organization. DIMMs that cover adjacent slot positions do not need to be identical. When adding two DIMMs to the configuration shown in Figure 13 (above), you should populate the DIMMs in DIMM sockets C1 and D1 as shown in the following diagram. Populated DIMM sockets are shown in gray. Revision 1.5 21 Intel order number: D66403-006