Intel S815EBM1 Product Guide - Page 35
Setting the BIOS Configuration Jumper
UPC - 735858149839
View all Intel S815EBM1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Setting the BIOS Configuration Jumper CAUTION Always turn off the power and unplug the power cord from the server before changing the jumper. Moving the jumper with the power on may result in unreliable server operation. 31 J9G2 Figure 19. BIOS Configuration Jumper Block Location OM12206 This three-pin jumper block, shown in Figure 19, enables all server board configurations to be done in BIOS Setup. Table 5 shows the jumper settings for the Setup program modes. Table 5. Jumper Settings for the BIOS Setup Program Modes Function/Mode Normal Configure Recovery Jumper Setting 1-2 3 1 2-3 3 1 None 3 1 Configuration The BIOS uses current configuration information and passwords for booting. After the POST runs, Setup runs automatically. The maintenance menu is displayed. The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. Upgrading 35