Intel S815EBM1 Product Guide - Page 7
Description, Server Board Features, Table 1. - processors
UPC - 735858149839
View all Intel S815EBM1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 Description Server Board Features Table 1. Server Board Features Feature Processors Memory Chipset I/O Control Peripheral Interfaces SCSI LED Connector Expansion Capabilities BIOS Power Management Wake on LAN† Technology Form Factor Description Support for either an Intel® Pentium® III processor in a Flip Chip Pin Grid Array (FC-PGA and FC-PGA2) package or an Intel® Celeron™ processor in a FC-PGA package. • Three 168-pin Dual Inline Memory Module (DIMM) sockets • Support for up to 512 MB system memory • Support for single row or double row DIMMs The S815EBM1 board includes the Intel® 815E Chipset, consisting of: • Intel® 82815 Graphics and Memory Controller Hub (GMCH) • Intel® 82801BA I/O Controller Hub (ICH2) • 4 Mbit Firmware Hub (FWH) (STM M50FW040 or equivalent) SMSC LPC47M132 LPC bus I/O controller. • One back panel serial port; one onboard serial port header • USB ports: four back panel • One parallel port • Two IDE interfaces with Ultra ATA/66 and ATA/100 support • One floppy drive interface • PS/2† keyboard and mouse ports Allows add-in SCSI controllers to use the same LED as the onboard I/O controller. Three PCI bus expansion slots (SMBus routed to PCI slot 2, S5 wake from all PCI slots). Intel/AMI BIOS. 4 Mbit Firmware Hub (FWH). Support for: • Advanced Power Management (APM) • Advanced Configuration and Power Interface (ACPI) • Plug and Play • SMBIOS Support for both ACPI Rev. 2.0 and APM Rev. 1.2. Support for system wake up using an add-in network interface card with remote wake up capability. MicroATX (9.6 inches by 8.2 inches). 7