Intel SBX82 User Guide - Page 30
Using switch block 2 SW2
UPC - 675900686984
View all Intel SBX82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using switch block 2 (SW2) You must remove the blade server from the SBCE unit, open the cover, and press the Light Path Diagnostics button to light any error LEDs that were turned on during processing. The following illustration and Table 1 on page 16 show the location and the settings for SW2. Figure 5. System board switch block (SW2) location. Switch block (SW2) Table 1. Switch block 2 (SW2) and settings SW2 Switch number Description Switch block: Eight switches • 1 - BIOS backup page jumper. - Open: the BIOS boots from the Primary BIOS page. - Closed: the BIOS boots from the backup BIOS page. • 2 - Wake on LAN Bypass - Open: Enabled - Closed: Disabled (default) • 3 - Reserved • 4 - Reserved • 5 - Reserved • 6 - Clear CMOS - Open: Disabled - Closed: Enabled • 7 - Reserved • 8 - Bypass power-on password - Open: Disabled (default) - Closed: Enabled 16 Intel Server Compute Blade SBX82 Installation and User's Guide