Intel SBX82 User Guide - Page 73
POST error messages
UPC - 675900686984
View all Intel SBX82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
POST error messages The following table provides an abbreviated list of the error messages that might appear during POST. See "Diagnostics" in the blade server Hardware Maintenance Manual and Troubleshooting Guide on the Intel Server Compute Blade SBX82 Resource CD for more information about the POST error messages. Table 6. Abbreviated list of POST error messages POST message Failing device or problem found 161 The real-time clock battery has failed. 162 A device configuration has changed. Suggested action Replace the battery. Make sure that your optional devices are turned on and installed correctly. 163 289 301 303 962 11xx 1162 1800 2400 2462 00019xxx ✏ NOTE If you are unable to start the Configuration/Setup Utility program, view the system event log in the management module. The time of day has not been set. Set the correct date and time. A failing DIMM was disabled. Make sure that the memory is correct for your blade server and that it is installed properly. Keyboard and keyboard controller • • Make sure that the keyboard/mouse/video select button LED on the front of the blade server is lit, indicating that the blade server is connected to the shared keyboard. Make sure that the keyboard cable is connected to the SBCE unit and nothing is resting on the keyboard keys. Parallel port configuration error Start the Configuration/Setup Utility program and make sure that the parallel-port setting is correct. Serial port error Make sure that the serial cable is connected correctly. Serial port configuration conflict Start the Configuration/Setup Utility program and make sure that the IRQ and I/O port assignments needed by the serial port are available. PCI adapter hardware interrupt Start the Configuration/Setup Utility program and make sure that the interrupt resource settings are correct. Video controller and memory • Make sure that the keyboard/mouse/video select button LED on the front of the blade server is lit, indicating that the blade server is connected to the shared monitor. • Make sure that the monitor is connected correctly to the SBCE unit. Processor x is not functioning or Make sure that processor x is installed correctly. If the failed the built-in test. problem remains, replace processor x. 59