Intel SBX82 User Guide - Page 72
POST beep code descriptions
UPC - 675900686984
View all Intel SBX82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
POST beep code descriptions POST emits one beep to signal successful completion. If POST detects a problem during startup, other beep codes might occur. Use the following beep code descriptions to help diagnose and resolve problems that are detected during startup. ✏ NOTE See "Diagnostics" in the blade server Hardware Maintenance Manual and Troubleshooting Guide on the Intel Server Compute Blade SBX82 Resource CD for more information about the POST beep codes. One beep Indicates successful completion of POST. Repeating long beeps Indicates that a memory error has occurred. Make sure that all DIMMs are correctly installed. One long beep and two small beeps Indicates that a video error has occurred and the BIOS cannot initialize the monitor screen to display additional information. Beep codes for specific problems Beep codes indicating specific system problems are listed in the following table. Table 5. POST beep code descriptions Beep code 1-1-4 All other beep codes Descriptions of the POST beep codes BIOS ROM checksum in-progress or failure. Action: 1. Move the BIOS code page jumper (J12) to pins 2 and 3 to boot from the backup BIOS code page. 2. Restart the blade server and flash the BIOS code. 3. Move the BIOS code page jumper back to pins 1 and 2 and restart the blade server. 1. Make sure that the system memory modules are installed correctly. 2. Turn off the blade server; then restart the blade server. 58 Intel Server Compute Blade SBX82 Installation and User's Guide