Intel SR1530HCL Product Specification - Page 15
Power Sub-System, 1.7 System Cooling, 1.8 Rack and Cabinet Mounting Options, Server System
View all Intel SR1530HCL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Intel® Server Systems SR1530CL/SR1530HCL/SR1530HCS and SR1530CLR/SR1530HCLR/SR1530HCLSR Introduction 1.6 Power Sub-System The power sub-system consists of one non-redundant 400-watt power supply. It provides integrated management features, including over-temperature protection circuitry and overvoltage protection circuitry. The power supply operates within the following voltage ranges and ratings: Parameter Voltage (110) Voltage (220) Frequency Minimum 90 Vrms 180 Vrms 47 Hz Rated 100-127 Vrms 200-240 Vrms Maximum 140 Vrms 264 Vrms 63 Hz Start up VAC 85Vac +/-4Vac Power Off VAC 75Vac +/-5Vac The power supply must operate within all specified limits over the input voltage ranges shown in the table. Harmonic distortion of up to 10% THD must not cause the power supply to exceed the specified limits. The power supply shall power off if the AC input is less than 75 VAC +/- 5 VAC range. The power supply shall start up if the AC input is greater than 85 VAC +/- 4 VAC. Application of an input voltage below 85 VAC shall not cause damage to the power supply, including a fuse blow. 1.7 System Cooling The system provides two non-redundant blower fans. The Intel® Server System SR1530CL/SR1530CLR (SATA) also includes an additional PCI cooling fan. When external ambient temperatures remain within specified limits, the cooling system will provide sufficient air flow for all drive configurations, processors, supported memory, and add-in cards. 1.8 Rack and Cabinet Mounting Options The Intel® Server System SR1530CL/SR1530CLR (SATA) can be installed in 19-inch wide by up to 30-inch deep server cabinets. The system supports three rack mount options: A fixed mount relay rack/cabinet mount kit which can be configured to mount the system into either a 2-post or 4-post rack cabinet. (Product order code for the cabinet mount kit: AXXBRACKETS). A tool-less full extracting slide rail kit designed to support an optional cable management arm. (Product order code for the sliding rail kit: AXXHERAIL. Product order code for the cable management arm: AXXRACKCARM). A basic slide rail kit designed to mount the chassis into a standard 19-inch by up to 30inch deep EIA-310D compatible server cabinet. (Product order code for the slide rail kit: AXXBASICRAIL). Revision 2.2 7 Intel order number D71005-005