Intel SR2625UR Service Guide - Page 110
Installing the 2.5-Inch Fixed Hard Disk Drives - drivers
UPC - 735858206792
View all Intel SR2625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
d. Continue with step 5. C D A B AF002122 Figure 80. Installing Power and SATA Cables (Passive Midplane Installed) Note: You will not use the short SATA cable from the 6th HDD kit in a system with a passive midplane. 5. Install the hard drive into the sixth hard drive bay. For instructions, see "Installing a SAS or SATA Hot-swap Hard Disk Drive" on page 71. Installing the 2.5-Inch Fixed Hard Disk Drives To install up to two fixed 2.5-inch solid state hard disk drives into Intel® Server System SR2600UR/SR2625UR, your system must meet the following requirements: • You must purchase the 2.5-inch fixed hard disk drive kit, order number ASR2600FXDRV. • You must purchase one or two 2.5-inch solid state hard disk drives. • Your server system must have one or two free SATA ports on the server board or you must have an add-in card that supports the 2.5-inch solid state hard disk drives. Note: The 2.5-inch fixed hard disk drivers (ASR26XXFXDRV) configured with Intel® Embedded Server RAID Technology II is not compatible with hardware RAID mode by using an 90 Intel® Server System SR2600UR/SR2625UR Service Guide