Intel SR2625UR Service Guide - Page 79
Removing DIMMs, Installing or Replacing the Processor
UPC - 735858206792
View all Intel SR2625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Removing DIMMs To remove a DIMM, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 50. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 56 3. Locate the DIMM sockets (see Figure 40). 4. Gently spread the retaining clips at each end of the socket. The DIMM lifts from the socket. 5. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package. Installing or Replacing the Processor Caution: Processor must be appropriate: You may damage the server board if you install a processor that is inappropriate for your server. For a web link to the list of compatible processor(s), see "Additional Information and Software" on page 4. Caution: ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to the processor by doing the following: (1) Touch the metal chassis before touching the processor or server board. Keep part of your body in contact with the metal chassis to dissipate the static charge while handling the processor. (2) Avoid moving around unnecessarily. Caution: Protective socket cover needs to be removed for proper cooling of the processor; failure to remove the cover could result in damage to the system. Intel® Server System SR2600UR/SR2625UR Service Guide 59