Home » Intel Manuals » Storage Adapters » Intel SRCS16 » Manual Viewer

Intel SRCS16 Hardware User Guide - Page 19

Inserting the Intel® RAID Controller SRCS16 in a PCI Slot, devices.

UPC - 735858167116

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

5) Insert the RAID Controller SRCS16. Align the RAID controller to a PCI slot. Press down gently but firmly to properly seat the RAID controller in the slot. Figure 2.2 shows how to insert the RAID Controller SRCS16 in a PCI slot. Figure 2.2 Inserting the Intel® RAID Controller SRCS16 in a PCI Slot Bracket Screw 32-bit PCI slots 5 V, 64-bit PCI slot 3.3 V, 64-bit PCI slots 6) Screw the bracket to the computer frame. 7) Configure the Serial ATA devices and install them in the host system computer case. See the documentation for the Serial ATA device for any pre-installation configuration requirements. 8) Connect the Serial ATA cables between the RAID Controller SRCS16 and the Serial ATA devices. Chapter 3, "Intel® RAID Controller SRCS16 Technical Reference," shows the connector locations on your RAID Controller SRCS16. Installation 19

Section	Page
Preface	8
Figures	12
Tables	13
Chapter 1 Overview	14
1.1 Overview	14
1.2 Features	14
1.3 Hardware	15
1.3.1 RAID Controller Configurations	15
Table 1-1 Intel® RAID Controller SRCS16 Adapter Features	15
Figure 1.1 Intel® RAID Controller SRCS16 Components	16
1.3.2 Configuration on Disk	16
1.3.3 Drive Roaming	16
Chapter 2 Hardware Installation	17
2.1 Requirements	17
2.2 Installation	17
Figure 2.1 Installing the Battery Backup Unit	18
Figure 2.2 Inserting the Intel® RAID Controller SRCS16 in a PCI Slot	19
2.3 After You Have Installed the RAID Controller	20
Chapter 3 Intel® RAID Controller SRCS16 Technical Reference	21
3.1 Overview	21
Figure 3.1 Intel® RAID Controller SRCS16 Block Diagram	21
Table 3-1 Intel® RAID Controller SRCS16 Connector and Jumper Description	22
Figure 3.2 RAID Controller SRCS16 Board Layout	22
3.2 Decoding the Audible Alarm	23
3.3 Technical Specifications	23
3.3.1 RAID Controller Specifications	23
Table 3-2 RAID Controller SRCS16 Specifications	23
3.3.2 Electrical Characteristics	24
Table 3.3 RAID Controller SRCS16 Maximum Power Requirements	24
3.3.3 Thermal and Atmospheric Characteristics	24
3.3.4 Safety Characteristics	24

Match case Limit results 1 per page

Installation

Insert the RAID Controller SRCS16.

Align the RAID controller to a PCI slot. Press down gently but firmly to properly seat

the RAID controller in the slot. Figure 2.2 shows how to insert the RAID Controller

SRCS16 in a PCI slot.

Figure 2.2

Inserting the Intel® RAID Controller SRCS16 in a PCI Slot

Screw the bracket to the computer frame.

Configure the Serial ATA devices and install them in the host system computer case.

See the documentation for the Serial ATA device for any pre-installation configuration

requirements.

Connect the Serial ATA cables between the RAID Controller SRCS16 and the Serial ATA

devices. Chapter 3, “Intel® RAID Controller SRCS16 Technical Reference,” shows the

connector locations on your RAID Controller SRCS16.

Bracket Screw

32-bit PCI slots

5 V, 64-bit PCI slot

3.3 V, 64-bit PCI slots