Intel SRCS16 Hardware User Guide - Page 20
After You Have Installed the RAID Controller, Intel RAID Software User's Guide - drivers
UPC - 735858167116
View all Intel SRCS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
9) Replace the computer cover and power up the system. Replace the computer cover and reconnect the power cords. Turn power on to the computer. The BIOS Configuration utility prompt times out after several seconds. The second portion of the BIOS message displays the Intel® RAID Controller SRCS16 number, firmware version, and cache SDRAM size. The numbering of the controllers follows the PCI slot scanning order used by the host motherboard. When you see the message: Press to run BIOS Console Press the and keys at the same time. The firmware takes several seconds to initialize. During this time the adapter scans the Serial ATA ports. 2.3 After You Have Installed the RAID Controller After installation, you must configure the RAID Controller SRCS16 and install the operating system driver. The Intel RAID Software User's Guide instructs you about the configuration options and how to set them on your RAID Controller SRCS16. After You Have Installed the RAID Controller 20