Intermec CK70 Intermec Terminal Emulator (ITE) User Guide - Page 95

Chapter 3 - Customizing Your Configuration Input This is called with two parameters: • a character string enclosed in quotes used as a user prompt. • a string variable name indicating where the text string is stored. InputHidden Same as the Input script command except that user input is echoed as a string of asterisks. HostName HostName is case-sensitive and must be presented as mixed-case letters. HostName is followed by a character string enclosed in quotes. The character string can be a host name or an asterisk. The HostName command acts as an IF clause. If the host name matches, the following section of the script file is executed up to the next HostName command. If an asterisk is used, it matches any host name. Note: If a session (friendly) name is entered, then this is used in place of the host name or server IP name to section off the auto-login script. WaitFor Wait for a list of up to ten strings. Strings must be enclosed in quotes, separated by a comma, and cannot exceed 20 characters in length. Send Sends a character string enclosed in quotes or a string variable to the host. The character string enclosed in quotes can have an embedded control key in the ITE application. Pause "xxxxx" Delays the computer for x milliseconds, halting computer operation from receiving and processing for the duration specified. PromptSessionStart If this variable is defined and set to any value other than 0, the application prompts the user to press Enter: • before starting a Telnet session with the host. • when the connection to the host is lost. Do not put quotes around the variable. This prompt does not appear when you use auto-login restart, since doing so does not close an existing connection. Restart "x" Restarts the autologin script file. The "x" is a dummy argument. Intermec Terminal Emulator (ITE) User Guide 83