Intermec CS40 Intermec Terminal Emulator (ITE) User Guide - Page 64

Chapter 2 - Configuring and Managing ITE Display Options (continued) Option Select Font Func Hotspot Menu Hotspot URL Hotspot Copy/Paste Ignore CnrTaps Description Value Sets the font for the ITE screens. Lucida Console (Default) Courier New Courier New Bold Courier New Bold Italic When enabled, ITE recognizes function Enabled or Disabled. key descriptions on the screen for F1 Default is Disabled. through F24, such as "F3=Exit". The format must be: (( | ) 'F' '=' ). This sends the Function key represented by to the keypad as if you pressed that key. On a double-click, if this is enabled but is not recognized, the computer emits an error beep. When this option is enabled, it recognizes Enabled or Disabled. a numeric menu option on the screen Default is Disabled. such as "90. Sign off ". The format must be: (( | ) `.' ). This sends the to the keypad followed by the Enter key as if you pressed those keys. On a double-click, if this is enabled but is not recognized, then the computer emits an error beep. When enabled, you can double-tap a Enabled or Disabled. displayed http://url address or file:// Default is Disabled. address to open that location in the default web browser. Tap the Exit button in the upper right corner to close the browser window. When enabled, you can copy and paste Enabled or Disabled. text on an ITE screen as follows: Default is Disabled. 1 Tap and drag to select characters. 2 Select Copy from the popup menu. 3 Tap the point where the characters should be pasted and select Paste from the popup menu. Because the upper corners of the screen are reserved for hot spots, you cannot copy or paste characters at those locations. When Copy/Paste is enabled, you cannot use the Focus via Touch Panel or Pan via Touch Panel features. When enabled, the computer ignores Enabled or Disabled. double-taps in the upper corners of the Default is Disabled. display to switch between sessions. 52 Intermec Terminal Emulator (ITE) User Guide