Intermec PM4i EasyADC for Microsoft Great Plains Installation Guide - Page 19
Part 6 - ribbon out error
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PSTAERPT66 Installing the PM4i (continued) Adjust the position of the green edge guide so the media is guided with a minimum of play and lock the nut. Close the front and side doors, making sure that the media runs through the front door slot. Adjust the position of the edge guide on the label slack absorber according to the width of the media. Turn on the PM4i. The LCD display on the front of the printer shows initialization messages. When initialization is complete, the EasyADC Console looks for the printer and connects it to the network. When the printer is connected, it pulls the excess ribbon back in and prints a test label. The red error light turns off, and the blue light stays on, indicating that the PM4i has been configured correctly. Skip ahead to Step 7, "Setting Security." If the test label does not print and the red error light stays on, there is a problem connecting the printer. Continue with Step 28. Double-click the EasyADC Console icon on the taskbar. Console icon 36 37