Intermec PM4i EasyADC for Microsoft Great Plains Installation Guide - Page 7
continued, Connect one Ethernet cable to the WA22 Ethernet port. - blue light
![]() |
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
STEP 2 Installing the WA22 (continued) Route the Ethernet cables through the cable routing channels in the bracket. Mount the WA22 in the bracket by inserting the shoulder screws into the keyhole slots in the bracket. Slide the WA22 down until it is firmly seated. Mounting screws (2-6 places) Cable routing channels Connect the Ethernet cable from the WA22 to the Power & Data Out port on the power bridge. Connect an Ethernet cable from the Data In port on the power bridge to a port on an Ethernet hub or switch connected to your LAN. Connect the AC power cord to the power bridge and an AC outlet. Mounting bracket Connect one Ethernet cable to the WA22 Ethernet port. 12 Ethernet port Power & Data Out Data In To Ethernet On the WA22, the green Power light turns on and stays solid and the other lights start blinking as the WA22 boots. The blue light turns on and remains on after the WA22 has finished booting. 13
![](/manual_guide/products/intermec-pm4i-easyadc-microsoft-great-plains-installation-guide-655bd39/7.png)