Invacare 3GRX-CG Owners Manual - Page 105
Installing Wheel Locks for Motor/Gearbox Assemblies, Wheel Lock, Mounting Holes
View all Invacare 3GRX-CG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Installing Wheel Locks for Motor/Gearbox Assemblies 8 SETUP/MAINTENANCE Refer to FIGURE 11 for proper positioning of wheel locks. 1. Determine the appropriate wheel lock mounting position on the wheel lock mounting bracket located on the side frame (FIGURE 11). 2. Using the wheel lock mounting holes shown in FIGURE 11, Position the wheel lock on the outside of the wheel lock mounting bracket of the side frame. 3. Using the two hex screws, washers and locknuts, loosely secure the wheel lock to the wheel lock mounting bracket. 4. Repeat STEPS 1-2 for the opposite wheel lock. 5. Adjust the wheel locks. Refer to Adjusting Wheel Locks on page 107. Wheel Lock Mounting Bracket Side Frame 1 in Forward 2 in Forward Wheel Lock Mounting Holes Standard Locknuts Wheel Lock Washers Hex Screws Standard 2 in Forward 1 in Forward FIGURE 11 Installing Wheel Locks for Motor/Gearbox Assemblies Use this side of mounting hole only. Part No 1143151 105 Invacare 3G Storm Series®