Invacare 3GTQSP Owners Manual 3 - Page 40
Installing/Removing Elevating Legrests, Installing, Removing
View all Invacare 3GTQSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5 USAGE 5.6 Installing/Removing Elevating Legrests Installing 1. Turn legrest to side (open footplate is perpendicular to wheelchair). 2. Install the legrest hinge plates onto the hinge pins on the wheelchair frame. 3. Rotate legrest toward the inside of the wheelchair until it locks in place. The footplate will be on the inside of the wheelchair when locked in place. 4. Repeat STEPS 1-3 for the opposite legrest. 5. After the user is seated in wheelchair, adjust footplate to correct height by loosening nut and sliding the lower footrest assembly UP or down until desired height is achieved. Removing 1. Push the legrest release handle toward the inside of the wheelchair (facing the front of the wheelchair) and swing the legrest to the outside of the wheelchair. 2. Lift UP on the legrest and remove from the wheelchair. 3. Repeat STEPS 1- 2 for opposite side of wheelchair. Hinge Pins Hinge Plates Calfpad Legrest Legrest Release Handle Bolt/Nut FIGURE 7 Installing/Removing Elevating Legrests Invacare® Adjustable ASBA Seats 40 Part No 1143192