Invacare 3GTQSP Owners Manual 3 - Page 43
Warning, Caution
View all Invacare 3GTQSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5.9 Installing/Removing the Power Elevating Legrests 5 USAGE ƽ WARNING To prevent personal injury, always verify proper positioning of legs and feet prior to use. Individual user weight may impact the rate of travel for each legrest assembly. If simultaneous operation is desired, select a speed which allows for the most uniform travel. DO NOT insert fingers between legrest components, otherwise personal injury may occur. CAUTION Never allow items to become trapped between the legrest assemblies, otherwise damage to the power legrests may occur. Ensure that all parts of both power legrests are clear of any obstructions before raising and lowering, otherwise damage to the power legrests may occur. Refer to FIGURE 10 on page 44. Installing the Power Elevating Legrests 1. Turn power legrest to side (open footplate is perpendicular to wheelchair) (Detail "A" of FIGURE 10). 2. Insert the mounting pin of power legrest into the mounting hole of the seat frame (Detail "A" of FIGURE 10). Make sure the legrest sits flush on the seat frame. 3. Rotate the power legs toward the INSIDE of the wheelchair until it locks in place. The footplate will be on the INSIDE of the wheelchair when locked in place. 4. Repeat STEPS 1-3 for the opposite legrest. 5. Connect power legrest connector to jumper cable (Detail "B" of FIGURE 10). Part No 1143192 43 Invacare® Adjustable ASBA Seats