Invacare 3GTQSP Owners Manual 3 - Page 68
The footplate hinge will fall to the down position.
View all Invacare 3GTQSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
7 SETUP/MAINTENANCE 7.6 Installing Adjustable Angle Flip-up Footplate Hinge 1. Position footplate hinge on the footrest support tube at the desired height. 2. Position mounting screw, washers, spacer, and locknut on the footrest support as shown. 3. Flip the footplate hinge to the up position. The footplate hinge will fall to the down position. 4. Tighten the mounting screw, washer, and locknut that secure the footplate hinge to the footrest support until the footplate hinge remains in the up position. 5. Check the up and down motion of the footplate hinge to make sure the user of the wheelchair can operate the footplates easily. If footplate's motion is too tight, loosen the mounting screw and locknut approximately ¼-turn counterclockwise. If the footplate's motion is too loose, tighten mounting screw and locknut approximately ¼-turn clockwise. 6. Adjust footplate. Refer to Installing Adjustable Angle Flip-up Footplates on page 69. Footplate Hinge Mounting Screw Locknut Washers Spacer Footrest Support FIGURE 3 Installing Adjustable Angle Flip-up Footplate Hinge Invacare® Adjustable ASBA Seats 68 Part No 1143192